你了解如何實際操作電加熱恒溫箱嗎，下邊創日新小姐姐帶大伙兒認識一下電加熱恒溫箱操作方法和應用關鍵點。

Do you know how to operate the electric heating thermostat in practice? Miss Chuang Il-shin below will show you the key points of the operation and application of the electric heating thermostat.

電熱培養箱的操作技巧：

Operating skills of electrothermal incubator:

1、接通電源，按下電源開關，此時電源指示燈亮。

1. Turn on the power supply and press the power switch. At this time, the power indicator lights up.

2、實際操作工作人員需認真閱讀使用說明書，掌握、了解電加熱恒溫箱作用后，能夠接入開關電源。

2. Practical operators need to read the instructions carefully, master and understand the function of electric heating thermostat, and be able to access switching power supply.

3、當恒溫箱顯示信息溫度超過設置溫度時，加溫終斷、加溫顯示燈吹滅，在規范工作溫度下插電90分鐘后，溫度可長期保持，如箱里及時溫度超出設置限制警報溫度控溫儀溫度追蹤警報顯示燈亮，另外全自動斷開電加熱器開關電源。

3. When the display temperature of the thermostat exceeds the set temperature, the heating terminates and the display lamp blows out. After 90 minutes of plugging in at the standard working temperature, the temperature can be maintained for a long time, such as when the temperature in the box exceeds the set limit alarm temperature controller, the temperature tracking alarm display lamp is on, and the heater switch is automatically disconnected. Power Supply.

4、把溫度控制儀調到用戶所需的設定溫度值。

4. Set the temperature controller to the set temperature required by the user.

5、如開啟玻璃移門取試品時，電加熱器、送風模式機遇終止工作中，當合上玻璃移門后，電加熱器和離心風機能夠一切正常運行，那樣可防止塑造物的環境污染及溫度的過程狀況。

5. If the glass door is opened to take the sample, the electric heater and the air supply mode will stop working. When the glass door is closed, the electric heater and the centrifugal fan can operate normally, which can prevent the environmental pollution of the moulding objects and the process condition of temperature.

電熱培養箱的使用要點：

Main points of using electrothermal incubator:

1、儀器設備不適合在髙壓、大電流量、強磁場標準下應用，以防干撓溫度控制儀及產生觸電事故風險。

1. Instruments and equipment are not suitable for application under the standard of pressure, large current and strong magnetic field, in order to avoid the risk of dry-twisting temperature controller and electric shock.

2、電熱培養箱外殼必須有效接地，以保證使用安全。

2. The shell of electrothermal incubator must be grounded effectively to ensure safe operation.

3、本產品出廠前已經過嚴格調試，控溫儀菜單設定數據，請勿隨意修改。

3. The product has been strictly debugged before leaving the factory. The menu of the thermostat sets the data. Do not modify it at will.

4、請勿放置易燃易爆物品進行加溫，嚴防發生危險。

4. Do not place inflammable and explosive materials for heating to prevent danger.

5、電鍍工藝零部件和表層飾漆，應常常清潔，如長期性無需，應在電鍍件上涂中性化植物油脂或甘油，以耐腐蝕，恒溫箱外邊套好塑料膜防塵套將恒溫箱放到干躁房間內，以防控溫儀返潮毀壞。

5. Plating process parts and surface finish should always be clean. If it is not needed for a long time, neutralized vegetable oil or glycerin should be applied on the plating parts to resist corrosion. Plastic film dust-proof cover should be put on the outer side of the thermostat to keep the thermostat in a dry and restless room to prevent dampness and damage of the thermostat.

6、請勿放置高酸高堿物品，防止箱體腐損。

6. Do not place high-acid and high-alkali articles to prevent the box from decaying.http://www.lomiko.cn/